Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

How to add an OpenWRT device to UniFi network with 802.11r Fast Transition roaming
#5

OpenWRT config:
Code:
config wifi-iface 'wifinet2'
        option device 'radio5'
        option mode 'ap'
        option network 'lan'
        option key 'MyPassphrase'
        option encryption 'psk2+ccmp'
        option skip_inactivity_poll '1'
        option ieee80211r '1'
        option ssid 'MySSID'
        option mobility_domain '2ff5'
        option pmk_r1_push '1'
        option ft_over_ds '0'
        option reassociation_deadline '3000'
        list r0kh 'ff:ff:ff:ff:ff:ff,*,111222333444555666777888999aaabb'
        list r1kh '00:00:00:00:00:00,00:00:00:00:00:00,111222333444555666777888999aaabb'
        option wpa_disable_eapol_key_retries '1'
        option nasid '111222333444555666777888999aaabb'
        option ft_psk_generate_local '1'
        option short_preamble '0'
        option ieee80211w '1'

Unifi UAP-AC-Lite config:
Code:
interface=ath2
ctrl_interface=/var/run/hostapd
vlan_naming=1
bridge=br0
driver=atheros
nas_identifier=$bssid
mobility_domain=2ff5
rkh_pos_timeout=10000
reassociation_deadline=3000
pmk_r1_push=1
ft_over_ds=0
r0kh=ff:ff:ff:ff:ff:ff * 111222333444555666777888999aaabb
r1kh=00:00:00:00:00:00 00:00:00:00:00:00 111222333444555666777888999aaabb
ssid=MySSID
wpa_group_rekey=3600
wpa_group_update_count=4
wpa_gmk_rekey=86400
wpa_passphrase=MyPassphrase
wpa=2
eapol_version=2
ieee80211w=1
wpa_pairwise=CCMP
wpa_key_mgmt=WPA-PSK FT-PSK
logger_syslog=-1
logger_syslog_level=2
wlan_id=2ff5
iapp_key=111222333444555666777888999aaabb
own_ip_addr=192.168.6.3

[Image: kavove-zrnka-lajna.jpg]
Coffee phreak!
Reply


Messages In This Thread



Users browsing this thread: 1 Guest(s)